Jump to content

mr_sleeper

Standard Member
  • Content count

    81
  • Joined

  • Last visited

Community Reputation

0 Neutral

About mr_sleeper

  • Rank
    Newbie

General Info

  • Location
    Australia NSW
  • Gender
    Male
  • Car Type
    Nissan Silvia
  • Car Model
    180sx
  • Occupation
    IT
  1. WTB '89 180SX Fuel Door & Clip

    I got some help from Taarks to get spares from nissan to fix my fuel door. Give him a try. https://www.efisolutions.com.au/
  2. Is the only change the turbo or were other mods made at the same time? Have you checked spark plugs to see what colour they are? Is turbo internal or external wastegate? what boost pressure you running? What is the actuator rated for?
  3. 180sx CA Powered project - slow build

    Haven't given up on this, just not much time given family commitments. Got a daughter that gets sick easily which leads to her needing be hospitalised. Got swaybar fitted, front and rear now. NRG180 - how much did it set you back to do the 5 stud conversion? Is it a one man job or would i need help? Not sure what i want to do with brake package until i drive it so might be a later job. Decided i will set it up for hill climbs in the local area until I can afford to get all the body work done (rust repairs, respray, fit body kit). Done a battery relocation to the boot with circuit breaker installed Fitted some reclinable bucket seats (just some SAAS ones). Gonna be interesting with a helmet on, sunroof open is fine. Got a rectangle heat exchanger from ebay as the square one I got with the intercooler kit sat too low for my liking and that sits much better now. Tried to upload photos but I need to make the files smaller so might try later to do that. Need to sort out clutch pedal (pedal goes straight to the floor, no pressure). Got a new slave cylinder to fit when I get time. Then onto the wiring for the thermos fans, water pump, gauges and sort out the coolant pipes. Hopefully have it running in time to do some hillclimbs next year.
  4. CA18DET Cams options

    I was talking to a few vendors about aftermarket cams (Spool make some too) and they all said it will move the power curve and add lag and affect the turbo response. I haven't decided on cams yet for my CA and it is off the road so no experience to offer. I think with cams bigger than 256 you may need to change the lifters, can someone else confirm? For turbo chat to Hypergear, the ATR28SS1.5 with ball bearing looks like will be a very good option for response. I am chomping at the bit to get enough cash together to get the engine freshened up and buy one of those.
  5. Budget CA S13 Track Car - Upgrades time...

    Did you have any trouble getting the OEM brake lines off? I tried to do mine and couldn't get them to budge and thought i was gonna break something.
  6. I am curious on the answer to this too as I was looking at the atr28ss1.5 for the response and the answer might make me change my mind
  7. how much extra to go ball bearing in an atr28ss1.5? what would be the difference in the way the turbo behaves between bush and ball bearing in the atr28ss1.5?
  8. S13 door lock

    if taarks can't help try japanese import spares or nisswreck. I bought new door locks from one of those years ago but can't remember which one
  9. How old are u and what import you drive?

    I'm 37 and own an 89 180sx (CA FTW ) had it about 5 or 6 years, only drove it on and off the trailer when i bought it, work in progress. Was relatively stock but had a hard life so i got it cheap.....not stock anymore. Previous import was an SW20 MR2 Turbo, nice car to drive if setup right, real mongrel to work on.
  10. Help with engine cutting out

    Do you have the haltech software? If so could one person drive and other use laptop watching haltech info? (e.g. check sensors working, check for knock, fuel pressure etc) See if you can get some info out of haltech when it craps itself.
  11. Thanks for the FPR setup Johnny, arrived nice and quick
  12. I'm in the market for an FPR setup, PM sent
  13. Thanks pmod, Stao I will have to pull my finger out and get another Hypergear powered CA going then
  14. Stao are the results you see from the ATR28SS turbo's any more consistent on CA18? I am saving/working away towards an ATR28SS1.5 for my CA18 for a responsive setup. Coastie did you look into getting someone to fab up full custom exhaust/manifold vs off the shelf? If so was it price or build quality that lead you to off the shelf gear? After reading a lot about different people saying various brands/models are restrictive I was thinking of getting a custom full exhaust (dump all the way to tip), my theory is if it is custom you get full control over the piping size and if I ask for free flowing as possible it should be achievable with the right fabricator. I was also looking to use factory manifold as I am going for response vs outright horsepower....but may rethink that. Either of you know how to tell if the manifold is restrictive other than try a different one when it comes time to tune?
  15. s14 running rich as f**k

    Have you checked o2 sensor? I have had cars run rich as hell before when the o2 sensor stuffed
×